SN74AHC74QPWRG4Q1
| Parameters | |
|---|---|
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
SN74AHC74QPWRG4Q1 Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of Automotive, AEC-Q100, 74AHCseries FPGA. A frequency of 115MHzshould be the maximum output frequency. T flip flop consumes 2μA quiescent energy. The number of terminations is 14. This D latch belongs to the family of 74AHC74. The power supply voltage is 3.3V. The input capacitance of this JK flip flopis 2pF farads. In this case, the D flip flop belongs to the AHC/VHC/H/U/Vfamily. It is mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. With a current output of 8mA , it offers maximum design flexibility. It has 1 output lines to operate.
SN74AHC74QPWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHC series
14 pins
SN74AHC74QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74AHC74QPWRG4Q1 Flip Flops applications.
- Balanced 24 mA output drivers
- Shift registers
- Supports Live Insertion
- Latch
- Control circuits
- Guaranteed simultaneous switching noise level
- Communications
- High Performance Logic for test systems
- Balanced Propagation Delays
- Parallel data storage