SN74AHC595QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 21.5 ns |
| Turn On Delay Time | 21.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Max Frequency@Nom-Sup | 40000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC595QPWRQ1 Overview
There is an embedded device in the package 16-TSSOP (0.173, 4.40mm Width). 16 is the number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. The part's operating supply voltage is rated 3.3V. 16 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as AHC/VHC/H/U/V. There is a component mounted in the way of Surface Mount on this board. Operating temperatures are within the range of -40°C~125°C. It is supplied with voltage within 2V~5.5V. In this case, the electrical component belongs to the series Automotive, AEC-Q100, 74AHC. The 74AHC595 family can be used to find similar parts. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. In the device, there are 1 input lines that are available for use. It can deliver voltage at 2/5.5V. This part should not have a supply voltage (Vsup) greater than 5.5V. TR is used to package the part. A 9 output is present on the part.
SN74AHC595QPWRQ1 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2/5.5V power
Packing Method : TR
SN74AHC595QPWRQ1 Applications
There are a lot of Texas Instruments SN74AHC595QPWRQ1 Shift Registers applications.
- LED matrix control
- temporary data storage
- Data Processors
- Generate time delay toward digital circuits
- Serial-to-parallel data conversion
- Serial to parallel converter
- Counter
- Parallel to serial converter
- 7-segment display control
- Pattern Recognizers