SN74AHC595PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC595PWR Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. Chip terminations add up to 16. There is a Cut Tape (CT) case containing it. 3.3V is the operating supply voltage of the part. There are 16 pins on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of AHC/VHC/H/U/V. Mounting of this component is indicated by Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. Voltages within 2V~5.5V are supplied to the device. 74AHC is the series number of this electrical component. A 74AHC595 family can be used to search for similar parts. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. The device has 1 input lines. It can deliver voltage at 2/5.5V. This part requires a maximum supply voltage (Vsup) of 5.5V. The number of output lines to be operated is 9. To package the part, TR is used.
SN74AHC595PWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2/5.5V power
With 9 output lines
Packing Method : TR
SN74AHC595PWR Applications
There are a lot of Texas Instruments SN74AHC595PWR Shift Registers applications.
- Serial to parallel converter
- Generate time delay toward digital circuits
- Cache memory in CPU
- temporary data storage
- Pseudo Random Pattern Generator
- 8-bit data storage
- Sequence generator
- Remote control holding register
- Data Processors
- Dual-rank shift, hold, and bus applications