SN74AHC595PWE4
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 10.2 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
SN74AHC595PWE4 Overview
There is a TSSOP package embedded with the device. 16 is the total number of terminations on the chip. The part's operating supply voltage is rated 3.3V. It is a part that has 1 elements on it. 16 pins are available on the device. Surface Mount is recommended for mounting. There is an electronic component in the AHC/VHC/H/U/V. The operating supply voltage of this chip is noted to be within the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The pin count is 16. Under temperatures below 85°C, it is recommended to use it. In order for this device to function, the value should not be less than -40°C. A voltage of 5.5V is used to supply this voltage. It is important to note that this supply voltage is higher than 2V. It is necessary to operate 9 output lines.
SN74AHC595PWE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC595PWE4 Applications
There are a lot of Texas Instruments SN74AHC595PWE4 Shift Registers applications.
- Cache memory in CPU
- Flash Memory
- Pattern Recognizers
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- data manipulation
- ROM Chips
- data transfer
- store data in digital form
- temporary data storage