SN74AHC595N
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 115MHz |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 40μA |
| Number of Output Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
SN74AHC595N Overview
This device can be found embedded within the package 16-DIP (0.300, 7.62mm). This chip has a total termination count of 16. It is packed in a case number Tube. Voltage rating of the part is 3.3V. It is equipped with a pin count of 16. Mounting by Through Hole is recommended. The electronic component belongs to the AHC/VHC/H/U/V. There is a component mounted in the way of Through Hole on this board. The operating temperature ranges -40°C~125°C. Votage is supplied within 2V~5.5V. This electrical component belongs to the 74AHC series. By using the 74AHC595 family, you can find similar parts. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Ensure that Vsup is not less than 2V when powering this part. This device has 1 input lines available. Voltage can be delivered at 2/5.5V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V. The number of output lines to be operated is 9. There is 115MHz frequency set on the device.
SN74AHC595N Features
With 16 pins
Mounted in Through Hole type.
Based on 74AHC595 family
It supplies 2/5.5V power
With 9 output lines
SN74AHC595N Applications
There are a lot of Texas Instruments SN74AHC595N Shift Registers applications.
- 7-segment display control
- Pattern Recognizers
- Delay Line
- 8-bit data storage
- ROM Chips
- data manipulation
- Dual-rank shift, hold, and bus applications
- Pseudo Random Pattern Generator
- Interconnectors
- Parallel data