SN74AHC595DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 10.2 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC595DRG4 Overview
There is an embedded device in the package SOIC. The number of the chip's terminations sums up to 16. It is used to pack in Tape & Reel (TR) case. Its operating supply voltage is rated at 3.3V. 1 elements make up this part. 16 pins are present on the device. Surface Mount is recommended for mounting. Electronic components belong to the AHC/VHC/H/U/V group. A range of 5V is noted as the operating supply voltage of this chip. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There are a total of 16 pins on it. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -40°C. Under 5.5V, this supply voltage is employed. This supply voltage is employed higher than 2V. There are 9 output lines to operate.
SN74AHC595DRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC595DRG4 Applications
There are a lot of Texas Instruments SN74AHC595DRG4 Shift Registers applications.
- temporary data storage
- Parallel to serial converter
- Parallel data
- data transfer
- Serial to parallel converter
- Delay Line
- ROM Chips
- 8-bit data storage
- Data Processors
- Data Format Converters