SN74AHC595DRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC595DRE4 Overview
In package SOIC, there is an embedded device. The number of the chip's terminations sums up to 16. A Tape & Reel (TR) case is used to pack it. This part has an operating supply voltage of 3.3V. 1 elements make up this part. The device is equipped with 16 pins. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as AHC/VHC/H/U/V. In terms of supply voltage, this chip operates within the range of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The total number of pins is 16. It should be used below 125°C. It should not be lower than -40°C to operate this device. A voltage of 5.5V is used to supply this voltage. The supply voltage is higher than 2V. It is necessary to operate 9 output lines of the system. TR is the way the part is packaged.
SN74AHC595DRE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
Packing Method : TR
SN74AHC595DRE4 Applications
There are a lot of Texas Instruments SN74AHC595DRE4 Shift Registers applications.
- Parallel data
- data manipulation
- store data in digital form
- Output expansion
- ROM Chips
- Pulse Extenders
- Serial-to-parallel data conversion
- Remote control holding register
- Counter
- Pattern Recognizers