SN74AHC595DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 10.2 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC595DBRE4 Overview
SSOP is a package containing the embedded device. This chip has a total termination count of 16. This item is packed in case Tape & Reel (TR). This part has an operating supply voltage of 3.3V. It is a part that has 1 elements on it. The device is equipped with 16 pins. Surface Mount is recommended for mounting. The electronic component belongs to the AHC/VHC/H/U/V. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. In total, there are 16 pins on it. Under temperatures below 85°C, it is recommended to use it. For this device to work, it should not go below -40°C. A voltage of 5.5V is employed as the supply voltage. It is used at a voltage greater than 2V. A total of 9 output lines are available for operation.
SN74AHC595DBRE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC595DBRE4 Applications
There are a lot of Texas Instruments SN74AHC595DBRE4 Shift Registers applications.
- Output expansion
- Delay Line
- Parallel to serial converter
- Pulse Extenders
- Data Processors
- Remote control holding register
- Pseudo Random Pattern Generator
- ROM Chips
- Generate time delay toward digital circuits
- Remote control holding register