SN74AHC594PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 2/6V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594PWRE4 Overview
This device can be found embedded within the package TSSOP. Chip terminations add up to 16. There is a Tape & Reel (TR) case containing it. This part has an operating supply voltage of 3.3V. A total of 1 elements can be found on this part. It has 16 pins. It is recommended to mount by Surface Mount. There is an electronic component in the AHC/VHC/H/U/V. This chip's operating supply voltage is reported as 5V. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Voltage can be delivered at 2/6V. IC chip bits total 8. This board has 16 pins in total. A temperature below 85°C is recommended for its use. Ideally, it should not fall below -40°C. It is used under the 5.5V supply voltage. There is a voltage applied to the supply that is greater than 2V. Operating on 9 output lines is possible.
SN74AHC594PWRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74AHC594PWRE4 Applications
There are a lot of Texas Instruments SN74AHC594PWRE4 Shift Registers applications.
- data manipulation
- temporary data storage
- Sequence generator
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Serial to parallel converter
- Pulse Extenders
- Data Format Converters
- Data Processors
- Pseudo Random Pattern Generator