SN74AHC594PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 14.4 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC594PWR Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. It sums up to 16 where the chip's terminations add up. A Tape & Reel (TR) case is used to pack it. This part has an operating supply voltage of 3.3V. 16 pins are provided on the device. The recommended mounting method is Surface Mount. In the AHC/VHC/H/U/V series, the electronic component belongs. Its mounting method is Surface Mount. -40°C~125°C is the range of operating temperatures for the device. The voltage supplied to it is within the range of 2V~5.5V. In the 74AHC series, this electrical component is found. You can search for similar parts based on the 74AHC594 family. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. In the device, there are 1 input lines. It can deliver voltage at 2/6V. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. Operation is available on only 9 output lines. There is a TR packaging for the part.
SN74AHC594PWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74AHC594PWR Applications
There are a lot of Texas Instruments SN74AHC594PWR Shift Registers applications.
- Pulse Extenders
- Data Processors
- Counter
- Generate time delay toward digital circuits
- Remote control holding register
- ROM Chips
- data manipulation
- Sequence generator
- LED matrix control
- Pseudo Random Pattern Generator