SN74AHC594PWG4
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
SN74AHC594PWG4 Overview
TSSOP is a package containing the embedded device. The number of the chip's terminations sums up to 16. This part has an operating supply voltage of 3.3V. It is a part that has 1 elements on it. 16 pins are located on the device. The recommended mounting method is Surface Mount. Electronic components are categorized as AHC/VHC/H/U/V. It is noted that this chip uses an operating supply voltage of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. IC chips contain a total of 8 bits. This board has 16 pins in total. Using it below 85°C is recommended. For this device to work, it should not go below -40°C. Under 5.5V, this supply voltage is employed. A voltage higher than 2V is used as a supply voltage. Operation is available on only 9 output lines.
SN74AHC594PWG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC594PWG4 Applications
There are a lot of Texas Instruments SN74AHC594PWG4 Shift Registers applications.
- data transfer
- Generate time delay toward digital circuits
- LED matrix control
- Parallel to serial converter
- Serial to parallel converter
- temporary data storage
- Data manipulation
- Serial-to-parallel data conversion
- Parallel data
- Data Format Converters