SN74AHC594PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 2/6V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594PWE4 Overview
There is a TSSOP package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 16. Parts with a 3.3V operating supply voltage are specified. A total of 1 elements can be found on this part. There are 16 pins on the device. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the AHC/VHC/H/U/V. This chip's operating supply voltage is reported as 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Voltage can be delivered at 2/6V. There are 8 bits in the IC chip. It has a total of zero pins. Under temperatures below 85°C, it is recommended to use it. Ideally, it should not fall below -40°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 2V. It is necessary to operate 9 output lines.
SN74AHC594PWE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74AHC594PWE4 Applications
There are a lot of Texas Instruments SN74AHC594PWE4 Shift Registers applications.
- Flash Memory
- Cache memory in CPU
- Pulse Extenders
- data manipulation
- store data in digital form
- Data Format Converters
- ROM Chips
- Remote control holding register
- Serial to parallel converter
- Output expansion