SN74AHC594NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594NSRG4 Overview
This device can be found embedded within the package SOP. The number of the chip's terminations sums up to 16. Tape & Reel (TR) is the case in which it is packed. A voltage of 3.3V is specified for the part's operating supply. On this part, there are 1 elements. The device is equipped with 16 pins. It is recommended to mount by Surface Mount. In this case, the electronic component belongs to the AHC/VHC/H/U/V. It is noted that this chip uses an operating supply voltage of 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A total of 8 bits are present on the IC chip. The pin count is 16. Under 85°C, it is recommended that it be used. For this device to work, it should not go below -40°C. A voltage of 5.5V is employed as the supply voltage. It is used at a voltage greater than 2V. It is necessary to operate 9 output lines.
SN74AHC594NSRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC594NSRG4 Applications
There are a lot of Texas Instruments SN74AHC594NSRG4 Shift Registers applications.
- Output expansion
- Delay Line
- Data Processors
- Data Format Converters
- Parallel to serial converter
- Counter
- Remote control holding register
- Generate time delay toward digital circuits
- data transfer
- Dual-rank shift, hold, and bus applications