SN74AHC594NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC594NSRE4 Overview
There is a SOP package embedded with the device. There are 16 terminations on the chip. The Tape & Reel (TR) case contains it. 3.3V is the operating supply voltage of the part. On this part, there are 1 elements. It has 16 pins. Surface Mount is recommended for mounting. An electronic component is included in the AHC/VHC/H/U/V. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A total of 8 bits are present on the IC chip. There are a total of 16 pins on it. Temperatures below 125°C are recommended for use. Ideally, it should not fall below -40°C. 5.5V is the supply voltage used. The supply voltage is higher than 2V. Operating on 9 output lines is possible.
SN74AHC594NSRE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC594NSRE4 Applications
There are a lot of Texas Instruments SN74AHC594NSRE4 Shift Registers applications.
- Serial to parallel converter
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- data transfer
- Parallel data
- LED matrix control
- Flash Memory
- data manipulation
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers