SN74AHC594NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC594NSR Overview
This device can be found embedded within the package 16-SOIC (0.209, 5.30mm Width). A total of 16 terminations can be found on the chip. There is a Tape & Reel (TR) case containing it. Its operating supply voltage is rated at 3.3V. 16 pins are located on the device. As a general recommendation, mounting by Surface Mount is recommended. In this case, the electronic component belongs to the AHC/VHC/H/U/V. Mounted in the same way as Surface Mount. -40°C~125°C is the operating temperature range. It is supplied with voltage within 2V~5.5V. The 74AHC series contains this electrical component. Search for similar parts based on the 74AHC594 family. This chip's operating supply voltage is reported as 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. There are 1 input lines available in the device. There are 9 output lines to operate. There is TR packaging for this part.
SN74AHC594NSR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
With 9 output lines
Packing Method : TR
SN74AHC594NSR Applications
There are a lot of Texas Instruments SN74AHC594NSR Shift Registers applications.
- 7-segment display control
- Interconnectors
- Flash Memory
- Serial-to-parallel data conversion
- Pulse Extenders
- ROM Chips
- Data manipulation
- Pseudo Random Pattern Generator
- data manipulation
- Output expansion