SN74AHC594DG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC594DG4 Overview
As a result, 16-SOIC (0.154, 3.90mm Width) package contains the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. Tube is the case in which it is packed. A voltage of 3.3V is specified for the part's operating supply. There are 16 pins on the device. It is recommended to mount by Surface Mount. In this case, the electronic component belongs to the AHC/VHC/H/U/V. There is a component mounted in the way of Surface Mount on this board. There is a temperature range of -40°C~125°C. There is a voltage supply within 2V~5.5V. The 74AHC series represents this electrical component. The 74AHC594 family can be used to find similar parts. The operating supply voltage of this chip is noted to be within the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. In the device, there are 1 input lines that are available for use. There are 9 output lines to operate.
SN74AHC594DG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
With 9 output lines
SN74AHC594DG4 Applications
There are a lot of Texas Instruments SN74AHC594DG4 Shift Registers applications.
- Parallel to serial converter
- Delay Line
- temporary data storage
- Serial-to-parallel data conversion
- Sequence generator
- Remote control holding register
- data manipulation
- Data Format Converters
- Flash Memory
- Serial to parallel converter