SN74AHC594DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 2/6V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594DE4 Overview
There is a SOIC package embedded with the device. This chip has a total termination count of 16. This part has an operating supply voltage of 3.3V. The part consists of 1 elements. Devices with 16 pins are available. As a general recommendation, mounting by Surface Mount is recommended. This electronic component is classified as AHC/VHC/H/U/V. The operating supply voltage of this chip is noted to be within the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Voltage can be delivered at 2/6V. It has 8 bits in total. 16 pins are present on it. It should be used below 85°C. In order for this device to function, the value should not be less than -40°C. It is used under the 5.5V supply voltage. It is used at a higher voltage than 2V. Operating on 9 output lines is possible.
SN74AHC594DE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74AHC594DE4 Applications
There are a lot of Texas Instruments SN74AHC594DE4 Shift Registers applications.
- Serial-to-parallel data conversion
- Pattern Recognizers
- Serial-to-parallel data conversion
- Data Processors
- store data in digital form
- Pulse Extenders
- Sequence generator
- Interconnectors
- Remote control holding register
- Parallel to serial converter