SN74AHC594DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594DBRG4 Overview
As a result, SSOP package contains the embedded device. 16 is the total number of terminations on the chip. Presented in a case of Tape & Reel (TR). Parts with a 3.3V operating supply voltage are specified. 1 elements are present in this part. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as AHC/VHC/H/U/V. As noted, this chip operates within the range of 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The total number of IC chip bits is 8. In total, it has 16 pins. Using it below 85°C is recommended. It should not be lower than -40°C to operate this device. A voltage of this type is employed under 5.5V. A voltage higher than 2V is used as a supply voltage. There are 9 output lines to operate.
SN74AHC594DBRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC594DBRG4 Applications
There are a lot of Texas Instruments SN74AHC594DBRG4 Shift Registers applications.
- Cache memory in CPU
- store data in digital form
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Generate time delay toward digital circuits
- 8-bit data storage
- Parallel to serial converter
- Output expansion
- 7-segment display control
- Parallel data