SN74ACT7805-40DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 25MHz |
| Base Part Number | 74ACT7805 |
| Function | Synchronous |
| Current - Supply (Max) | 400μA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 256 x 18 |
| Element Configuration | Dual |
| Max Supply Current | 400μA |
| Access Time | 20ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 40 ns |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7805-40DL Overview
You will find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.There is a case Tube in which it is packaged.A FIFO chip's memory is 4.5K 256 x 18 , which may be used to store applications and data.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.This FIFO memory has a mounting type of Surface Mount .For operation, a voltage of 4.5V~5.5V is used.The memory logic belongs to the series 74ACT .As far as operating current is concerned, it has a maximum of 400μA .It is recommended that memory IC be mounted in the Surface Mount direction.Memory IC belongs to the 74ACT7805 family.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 56 terminations, which indicates that FIFO means is empty.As far as the operation pins are concerned, they are 56 pins.There is a maximum current requirement of 400μA for its operation.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.When the frequency is set to 25MHz , the system can maintain good accuracy.It is normal for the component to own 5V power supplies.With the use of 2 circuits, FIFO memory chip provides enhanced flexibility.
SN74ACT7805-40DL Features
4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7805
FIFOs category
SN74ACT7805-40DL Applications
There are a lot of Texas Instruments SN74ACT7805-40DL FIFOs Memory applications.
- Desktop Computers
- Industrial Systems
- Routers
- Programmable Logic Controller
- Rate buffers
- Signal processing
- SPI Bus Flash Memory Devices
- Emulators
- Temporary storage elements
- Multi-stage synchronizer