SN74ACT7803-20DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 50MHz |
| Base Part Number | 74ACT7803 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 13ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 9 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7803-20DL Overview
FIFO memory chip can be found in the 56-BSSOP (0.295, 7.50mm Width) package.In the shape of a Tube , it's packaged.Apps and data can be stored in the 9K 512 x 18 memory of the FIFO chip.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.There is Surface Mount mounting type for this FIFO memory.For operation, a voltage of 4.5V~5.5V is used.It is a component from the 74ACT series.The recommended mounting way is Surface Mount .Memory IC belongs to the family of 74ACT7803 .It is possible to achieve high efficiency with a supply voltage of 5V .A total of 56 terminations are contained within FIFO means.56 pins are the operation pins.FIFO requires a minimum of 400μA current to operate.A voltage of 5V should be used for FIFO's maximum efficiency.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.When the frequency is set to 50MHz , the system can maintain good accuracy.Normally, the component owns 5V power supplies.With the use of 2 circuits, FIFO memory chip provides enhanced flexibility.
SN74ACT7803-20DL Features
9K 512 x 18 memory size
74ACT series
Best part number of 74ACT7803
FIFOs category
SN74ACT7803-20DL Applications
There are a lot of Texas Instruments SN74ACT7803-20DL FIFOs Memory applications.
- Disk Controllers
- Network switching/routing
- Switches
- Routers
- Event Recorder
- General Data Collection Applications at Low-Temperatures
- Consumer
- Application that requires re-writable nonvolatile parameter memory
- Medical Monitoring Device
- Data