SN74ACT574DWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 110MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ACT574DWRE4 Overview
SOICis the way it is packaged. The Tape & Reel (TR)package contains it. 20terminations have occurred. A voltage of 5V provides power to the D latch. ACTis the family of this D flip flop. It is mounted by the way of Surface Mount. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. There is a base part number Bus Driver/Transceiverfor the RS flip flops. There are 8bits in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. This D flip flop is well suited for TR based on its reliable performance. A total of 5V power supplies are needed to run it. A D flip flop with 2embedded ports is available. High efficiency requires the supply voltage to be maintained at 5V. It has 1 output lines to operate. It has 3lines. -24mAis the output current at high level. A 24mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. Operating temperatures should be above -40°C. It operates with the minimal supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. It is possible to achieve a frequency of 110MHz. It uses the logic IC BUS DRIVER. Currently, it is equipped with 1 functions . It is equipped with 20 pin count. The output current of 24mA makes it feature maximum design flexibility.
SN74ACT574DWRE4 Features
Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
SN74ACT574DWRE4 Applications
There are a lot of Texas Instruments SN74ACT574DWRE4 Flip Flops applications.
- Memory
- Modulo – n – counter
- Shift Registers
- Dynamic threshold performance
- Supports Live Insertion
- Consumer
- Buffered Clock
- Parallel data storage
- Computing
- Data storage