SN74ACT533DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT533DBR Overview
Package 20-SSOP (0.209, 5.30mm Width) includes it. It is packaged in the way of Cut Tape (CT). In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. It is a type of FPGA belonging to the 74ACT series. 8 Bits are used in the design of this electronic part. This device is designed with 20 terminations. The family it belongs to is 74ACT533. It operates with a supply voltage of 5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of ACT. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. In this device, there are 2 ports. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 5.5V. The device is powered by 5V power supplies. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Electronic circuits comprise 3 input lines. Based on its reliable performance, this device is suitable for TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility.
SN74ACT533DBR Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533DBR Applications
There are a lot of Texas Instruments SN74ACT533DBR Latches applications.
- Parallel Output
- Buffer/Storage Registers
- Shift register
- Counting
- Buffer Storage
- Watches
- Decade counting
- Synchronous frequency dividers
- Parallel data synchronization
- Communication systems