SN74ACT3632-30PCB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 120-LQFP Exposed Pad |
| Number of Pins | 120 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 33.4MHz |
| Base Part Number | 74ACT3632 |
| Function | Synchronous |
| Current - Supply (Max) | 400μA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 36K 512 x 36 x 2 |
| Max Supply Current | 400μA |
| Access Time | 15ns |
| Organization | 512X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Standby Current-Max | 0.0004A |
| Memory Density | 18432 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT3632-30PCB Overview
FIFO memory chip is contained in the 120-LQFP Exposed Pad package.There's a Tray on the package.There is a memory of 36K 512 x 36 x 2 available for storing data and applications.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.There is Surface Mount mounting type for this FIFO memory.Operating voltage is 4.5V~5.5V .It is a member of the 74ACT series .There is a maximum operating current of 400μA in memory IC's supply.Surface Mount is memory IC's recommended mounting method.The 74ACT3632 family contains this item.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 120 terminations.There are 120 pins on the operation pins.FIFO design requires a maximum current of 400μA to operate.FIFOs contains this gadget in its entirety.When the frequency is set to 33.4MHz , the system can maintain good accuracy.Components normally possess 5V power supplies.The gadget can also generate a value of MAILBOX .In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .Maintain the supply voltage (Vsup) above 4.5V for normal operation.
SN74ACT3632-30PCB Features
36K 512 x 36 x 2 memory size
74ACT series
Best part number of 74ACT3632
FIFOs category
SN74ACT3632-30PCB Applications
There are a lot of Texas Instruments SN74ACT3632-30PCB FIFOs Memory applications.
- Portable Information Devices
- Transistors
- Magnetic memories
- Seismic Data Collection at Extreme Temperatures
- Event Recorder
- Network bridges
- SPD for DDR3 Memory Modules
- Data-acquisition systems
- Cardiac Monitoring Device
- Notebook