SN74AC374DWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 155MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC374DWRE4 Overview
As a result, it is packaged as SOIC. There is an embedded version in the package Tape & Reel (TR). There have been 20 terminations. A voltage of 3.3V is used as the power supply for this D latch. Devices in the ACfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TR. This D flip flop is equipped with 0 ports. It is designed with 1 output lines. This input has 3lines. -24mAis the output current at high level. It is set to 24mAfor the low level output current. A temperature below 85°Cis recommended for operation. The operating temperature should be higher than -40°C. The minimal supply voltage is 2V. 6Vis the maximum supply voltage it supports. It is possible to achieve 155MHz frequencies. There is a logic IC BUS DRIVER used in the D flip flop. A total of 1 functions are provided by this T flip flop. It is equipped with 20 pins. The 24mA output current allows it to be designed with the greatest amount of flexibility.
SN74AC374DWRE4 Features
Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count
SN74AC374DWRE4 Applications
There are a lot of Texas Instruments SN74AC374DWRE4 Flip Flops applications.
- Frequency division
- Matched Rise and Fall
- Cold spare funcion
- QML qualified product
- Supports Live Insertion
- Shift registers
- Single Down Count-Control Line
- Data transfer
- Divide a clock signal by 2 or 4
- Asynchronous counter