SN74ABT533APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT533APWG4 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tube is the way in which it is packaged. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. It is a type of FPGA belonging to the 74ABT series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. This type belongs to the 74ABT533 family. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. This electronic device is categorized as a ABT electronic device. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. FF/Latches is the subcategory of this part. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. The supply voltage (Vsup) should be greater than 4.5V. Input lines are converted into binary equivalents by 8 output lines. Its maximum current supply (ICC) reaches 30mA.
SN74ABT533APWG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533APWG4 Applications
There are a lot of Texas Instruments SN74ABT533APWG4 Latches applications.
- Multistage ripple counting
- Parallel data storage
- PCs and Notebooks
- Registers
- Parallel Input
- Network Switches
- Motor Drives
- High-speed logic
- Data acquisition
- Four-bit storage with output enable