SN74ABT3614-30PCB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 120-LQFP Exposed Pad |
| Number of Pins | 120 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARITY GENERATOR/CHECKER, MAILBOX |
| Subcategory | FIFOs |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 33.4MHz |
| Base Part Number | 74ABT3614 |
| Function | Synchronous |
| Current - Supply (Max) | 130mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 64 x 36 x 2 |
| Element Configuration | Dual |
| Max Supply Current | 130mA |
| Access Time | 15ns |
| Data Bus Width | 36b |
| Direction | Bidirectional |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Density | 4.5 kb |
| Parallel/Serial | PARALLEL |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT3614-30PCB Overview
FIFO memory chip is contained in the 120-LQFP Exposed Pad package.There is a case Tray in which it is packaged.A memory of 4.5K 64 x 36 x 2 is available for storing applications and data on this FIFO chip.It is advisable to regulate the temperature to 0°C~70°C to ensure reliable operation.Surface Mount is the mounting type of the FIFO memory.Powered by a voltage of 4.5V~5.5V , it operates on a low supply voltage.The 74ABT series is represented by this memory logic.This FIFO products can operate at a maximum operating supply current of 130mA .Surface Mount is memory IC's recommended mounting method.Memory IC is a member of the 74ABT3614 family.It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 120 terminations.As far as the operation pins are concerned, they are 120 pins.In order to operate FIFO design, a maximum current of 130mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The gadget in FIFOs is self-contained.With a frequency of 33.4MHz , it exhibits good accuracy.Normally, the component owns 5V power supplies.This gadget can also be used to generate PARITY GENERATOR/CHECKER, MAILBOX .The 2 circuit is used in order to enhance its flexibility.
SN74ABT3614-30PCB Features
4.5K 64 x 36 x 2 memory size
74ABT series
Best part number of 74ABT3614
FIFOs category
SN74ABT3614-30PCB Applications
There are a lot of Texas Instruments SN74ABT3614-30PCB FIFOs Memory applications.
- Test site
- Optical memories
- Queues for communication systems
- Smart Meter
- GPS Offender Tracking
- Video Processing
- Cameras
- Event Recorder
- Multimedia
- Communications Systems