SN7496N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 5 |
| Family | TTL/H/L |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 79mA |
| fmax-Min | 10 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 10000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN7496N Overview
PDIP is the package in which the device is embedded. There are 16 terminations on the chip. A voltage of 5V is specified for the part's operating supply. 16 pins are available on the device. Through Hole is recommended for mounting. There is an electronic component in the TTL/H/L. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section are as follows: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. The device is capable of delivering voltage at 5V. The total number of IC chip bits is 5. It has a total of zero pins. It is recommended that it be used at temperatures below 70°C. For this device to operate, it cannot be lower than 0°C. A voltage of this type is employed under 5.25V. The supply voltage is higher than 4.75V.
SN7496N Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN7496N Applications
There are a lot of Texas Instruments SN7496N Shift Registers applications.
- temporary data storage
- store data in digital form
- Serial to parallel converter
- Data manipulation
- LED matrix control
- Pulse Extenders
- Serial-to-parallel data conversion
- 7-segment display control
- Data Format Converters
- ROM Chips