| Parameters |
| Min Operating Temperature |
0°C |
| Additional Feature |
SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD |
| Technology |
TTL |
| Terminal Position |
DUAL |
| Number of Functions |
1 |
| Supply Voltage |
5V |
| Terminal Pitch |
2.54mm |
| Operating Supply Voltage |
5V |
| Temperature Grade |
COMMERCIAL |
| Max Supply Voltage |
5.25V |
| Min Supply Voltage |
4.75V |
| Number of Bits |
4 |
| Family |
TTL/H/L |
| Logic Function |
Shift Register |
| Output Polarity |
TRUE |
| Logic IC Type |
PARALLEL IN PARALLEL OUT |
| Trigger Type |
NEGATIVE EDGE |
| Propagation Delay (tpd) |
32 ns |
| fmax-Min |
25 MHz |
| Count Direction |
RIGHT |
| Height Seated (Max) |
5.08mm |
| Length |
19.305mm |
| Width |
7.62mm |
| RoHS Status |
Non-RoHS Compliant |
| Lead Free |
Contains Lead |
| Mount |
Through Hole |
| Package / Case |
PDIP |
| Number of Pins |
14 |
| JESD-609 Code |
e0 |
| Number of Terminations |
14 |
| Terminal Finish |
TIN LEAD |
| Max Operating Temperature |
70°C |
SN7495AN Overview
PDIP is a package containing the embedded device. Chip terminations add up to 14. A voltage of 5V is specified for the part's operating supply. Devices with 14 pins are available. As a general recommendation, mounting by Through Hole is recommended. In the TTL/H/L series, the electronic component belongs. As noted, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD. IC chip bits total 4. It is recommended that it be used at temperatures below 70°C. This device should not be operated below 0°C. Under 5.25V, this supply voltage is employed. There is a voltage applied to the supply that is greater than 4.75V.
SN7495AN Features
With 14 pins
Operate supply voltage at 5V
SN7495AN Applications
There are a lot of Rochester Electronics SN7495AN Shift Registers applications.
- Parallel to serial converter
- 8-bit data storage
- Serial-to-parallel data conversion
- Flash Memory
- Remote control holding register
- temporary data storage
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Data manipulation
- Pattern Recognizers