SN7495AJ
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Additional Feature | SEPARATE CLOCKS FOR SHIFT RIGHT AND LOAD |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-GDIP-T14 |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Bits | 4 |
| Family | 7495 |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 32 ns |
| fmax-Min | 36 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN7495AJ Overview
There is a CDIP package embedded with the device. 14 is the number of terminations on the chip. Parts with a 5V operating supply voltage are specified. The electronic component belongs to the 7495. Additional aspects of this section are as follows: SEPARATE CLOCKS FOR SHIFT RIGHT AND LOAD. This part must have a minimum supply voltage (Vsup) of 4.75V. The maximum supply voltage (Vsup) for this part should not be more than 5.25V. A total of 4 bits are present on an IC chip. You should not use it above 70°C.
SN7495AJ Features
SN7495AJ Applications
There are a lot of Rochester Electronics SN7495AJ Shift Registers applications.
- Remote control holding register
- Sequence generator
- store data in digital form
- Serial to parallel converter
- Pulse Extenders
- data manipulation
- Counter
- Interconnectors
- LED matrix control
- Data Processors