SN74194N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | TTL/H/L |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 63mA |
| fmax-Min | 25 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74194N Overview
PDIP package contains the device. Chip terminations add up to 16. 5V is the operating supply voltage of the part. This electronic component is classified as TTL/H/L. There are also the following additional considerations in this section: HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK. There should be no less than 4.75V supply voltage (Vsup) for this part. A voltage of 5V can be delivered by it. This part requires a maximum supply voltage (Vsup) of 5.25V. A total of 4 bits are present on an IC chip. 16 pins are present on it. The temperature should not exceed 70°C.
SN74194N Features
It supplies 5V power
SN74194N Applications
There are a lot of Texas Instruments SN74194N Shift Registers applications.
- data transfer
- Delay Line
- Interconnectors
- Data Format Converters
- Remote control holding register
- 7-segment display control
- Flash Memory
- Cache memory in CPU
- Sequence generator
- LED matrix control