SN54S299J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-GDIP-T20 |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Bits | 8 |
| Family | S |
| Logic Function | Shift Register |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 5.08mm |
| Length | 24.195mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN54S299J Overview
There is a CDIP package embedded with the device. Chip terminations add up to 20. 5V is the operating supply voltage of the part. In the S series, the electronic component belongs. There are also the following additional considerations in this section: HOLD MODE. There must be a minimum supply voltage (Vsup) of 4.5V for this part. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. IC chips contain a total of 8 bits. Use it only at temperatures below 125°C.
SN54S299J Features
SN54S299J Applications
There are a lot of Rochester Electronics SN54S299J Shift Registers applications.
- Delay Line
- Serial to parallel converter
- Parallel to serial converter
- store data in digital form
- Data manipulation
- Pseudo Random Pattern Generator
- data manipulation
- Interconnectors
- Remote control holding register
- Generate time delay toward digital circuits