SN54S195J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 16.5 ns |
| Power Supply Current-Max (ICC) | 99mA |
| fmax-Min | 70 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN54S195J Overview
This device can be found embedded within the package CDIP. A total of 16 terminations can be found on the chip. Voltage rating of the part is 5V. Electronic components are categorized as S. Please take note of the following additional aspects of this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. For this part, Vsup should not be less than 4.5V. Voltage can be delivered at 5V. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. A total of 4 bits are present on the IC chip. 16 pins are present on it. Temperatures higher than 125°C should not be used.
SN54S195J Features
It supplies 5V power
SN54S195J Applications
There are a lot of Texas Instruments SN54S195J Shift Registers applications.
- Serial-to-parallel data conversion
- data transfer
- ROM Chips
- Parallel data
- data manipulation
- Remote control holding register
- Pseudo Random Pattern Generator
- Output expansion
- Generate time delay toward digital circuits
- Cache memory in CPU