SN54LS674J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Number of Pins | 24 |
| Packaging | Rail/Tube |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Propagation Delay | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Prop. Delay@Nom-Sup | 40 ns |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 40mA |
| fmax-Min | 20 MHz |
| Height | 4.91mm |
| Length | 31.75mm |
| Width | 13.4mm |
| Thickness | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
SN54LS674J Overview
There is an embedded device in the package CDIP. This chip has a total termination count of 24. Rail/Tube is the case in which it is packed. The part operates at 5V voltage. On this part, there are 1 elements. 24 pins are present on the device. It is recommended to mount by Through Hole. Electronic components belong to the LS group. It is noted that this chip uses an operating supply voltage of 5V. There are also the following additional considerations in this section: HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. The total number of IC chip bits is 16. In total, there are 24 pins on it. The product should be used at temperatures below 125°C. It should not be lower than -55°C to operate this device. It is employed under the condition of 5.5V. There is a voltage applied to the supply that is greater than 4.5V.
SN54LS674J Features
With 24 pins
Operate supply voltage at 5V
SN54LS674J Applications
There are a lot of Texas Instruments SN54LS674J Shift Registers applications.
- Data Format Converters
- Delay Line
- Parallel to serial converter
- Data manipulation
- store data in digital form
- 8-bit data storage
- Data Processors
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Remote control holding register