SN54HC164J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 295 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.0052 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 25 MHz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN54HC164J Overview
In package CDIP, there is an embedded device. 14 is the number of terminations on the chip. A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. 14 pins are located on the device. The recommended mounting method is Through Hole. Electronic components fall under the category of HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section include: AND-GATED SERIAL INPUTS (A AND B). A total of 8 bits are present on the IC chip. The pin count is 14. Temperatures below 125°C are recommended for use. Ideally, it should not fall below -55°C. A voltage of 6V is employed as the supply voltage. It is important to note that this supply voltage is higher than 2V. TUBE is the way the part is packaged.
SN54HC164J Features
With 14 pins
Operate supply voltage at 5V
Packing Method : TUBE
SN54HC164J Applications
There are a lot of Texas Instruments SN54HC164J Shift Registers applications.
- Pseudo Random Pattern Generator
- temporary data storage
- Delay Line
- 8-bit data storage
- Data manipulation
- Data Processors
- Flash Memory
- 7-segment display control
- Pattern Recognizers
- ROM Chips