SN54ALS299J
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Pbfree Code | no |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN54ALS299J Overview
As a result, CDIP package contains the embedded device. The number of the chip's terminations sums up to 20. A Rail/Tube case holds it. 5V is the part's operating supply voltage. It is a part that has 1 elements on it. In this device, there are 20 pins. Through Hole is recommended for mounting. In the ALS series, the electronic component belongs. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. A device capable of delivering voltage at 5V can be used. IC chips contain a total of 8 bits. The total number of pins is 20. Under 125°C, it is recommended that it be used. In order for this device to function, the value should not be less than -55°C. A voltage of 5.5V is employed as the supply voltage. Voltages higher than 4.5V are used for this supply.
SN54ALS299J Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN54ALS299J Applications
There are a lot of Texas Instruments SN54ALS299J Shift Registers applications.
- Interconnectors
- Counter
- Parallel data
- Pattern Recognizers
- Generate time delay toward digital circuits
- Data Processors
- data transfer
- 8-bit data storage
- Remote control holding register
- Delay Line