SN54195J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | TTL/H/L |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 63mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN54195J Overview
There is an embedded device in the package CDIP. The number of the chip's terminations sums up to 16. There is 5V operating supply voltage listed on the part. In the TTL/H/L series, the electronic component belongs. There are also the following additional considerations in this section: EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK. There should be no less than 4.5V supply voltage (Vsup) for this part. The device is capable of delivering voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup). It has a total of 4 pins. 16 pins are present on it. Temperatures above 125°C must be avoided.
SN54195J Features
It supplies 5V power
SN54195J Applications
There are a lot of Texas Instruments SN54195J Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Data Format Converters
- Cache memory in CPU
- 8-bit data storage
- Data Processors
- Interconnectors
- Sequence generator
- ROM Chips
- Pseudo Random Pattern Generator