SIP32508DT-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 54mOhm |
| Terminal Finish | PURE MATTE TIN |
| Max Power Dissipation | 833mW |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Power Dissipation | 833mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.8 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 46m Ω |
| Max Junction Temperature (Tj) | 125°C |
| On-State Resistance | 44mOhm |
| Height | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP32508DT-T1-GE3 Overview
It is packaged in the manner of a Tape & Reel (TR).This file is included in package SOT-23-6 Thin, TSOT-23-6.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Slew Rate Controlled features.The 6 pins are used for the operation of the system.The maximum output current must drop to 3A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.The LED driver has 54mOhm resistance.It is set to 3A in this case.In this lighting driver, SPST is the analog IC.
SIP32508DT-T1-GE3 Features
Resistance of 54mOhm
SIP32508DT-T1-GE3 Applications
There are a lot of Vishay Siliconix SIP32508DT-T1-GE3 Power Switches ICs applications.
- Set-Top Boxes
- Hot Swap
- Set-top-box
- Smartphone and PDA
- Hard Disk Drives
- Portable GPS Device
- Wireless Modem Data Cards
- Portable/Handheld Devices
- HDD, SSD
- USB Ports/Hubs