SIP32467DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 54mOhm |
| Max Power Dissipation | 300mW |
| Reach Compliance Code | unknown |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 300 μs |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 50m Ω |
| RoHS Status | ROHS3 Compliant |
SIP32467DB-T2-GE1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 4-UFBGA, WLCSP package.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled.For operation, we use the 4 pins.To meet the operation criteria, the maximum output current drops to 1.2A.It has a resistance of 54mOhm.The gadget uses an analog IC, which is SPST in this case.
SIP32467DB-T2-GE1 Features
Resistance of 54mOhm
SIP32467DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32467DB-T2-GE1 Power Switches ICs applications.
- Wireless Modem Data Cards
- Solid-State Drives
- PDAs
- Hot Swap
- Smart Phones, Feature Phones
- Set-Top Boxes
- PC Cards
- USB3.1 Power Delivery
- Portable GPS
- Gaming