SIP32453DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, CSPBGA |
| Number of Pins | 4 |
| Supplier Device Package | 4-WCSP (0.76x0.76) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Series | MICRO FOOT® |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 65mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Power Rating | 196mW |
| Max Power Dissipation | 196mW |
| Base Part Number | SIP3245* |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Voltage | 2.5V |
| Interface | On/Off |
| Max Supply Voltage | 2.5V |
| Min Supply Voltage | 900mV |
| Current - Output (Max) | 1.2A |
| Current | 1.2A |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 2.5V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.9V~2.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 54mOhm |
| Height | 545μm |
| Length | 800μm |
| Width | 800μm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SIP32453DB-T2-GE1 Overview
Digi-Reel? is the way it's packaged.It is included in the package 4-UFBGA, CSPBGA.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There is a SIP3245* family of things that it belongs to.For operation, 4 pins are used.The maximum output of the LED driving board is 1.2AV.It is mounted in the way of Surface Mount.It has a resistance of 65mOhm.It is included in the MICRO FOOT? series.It is set to 1.2A in this case.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.A maximum supply voltage of 2.5VV can be handled by the LED driving board.It is possible to use a voltage as low as 900mV V as a power supply voltage.
SIP32453DB-T2-GE1 Features
Resistance of 65mOhm
SIP32453DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32453DB-T2-GE1 Power Switches ICs applications.
- Solid State Drivers
- Portable GPS Device
- Hard Disk Drives
- Smart Phones, Feature Phones
- Hot Swap
- Hot Swap
- Wireless/Networking Cards
- USB Protection
- USB Power Distribution
- Telecom and Network Systems