SIP32413DNP-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 76mOhm |
| Terminal Finish | PALLADIUM GOLD OVER NICKEL |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SIP32413 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 2.4A |
| Input Voltage-Nom | 5V |
| Interface | On/Off |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | High Side |
| Power Dissipation | 580mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 210 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 62m Ω |
| Height Seated (Max) | 0.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SIP32413DNP-T1-GE4 Overview
A Tape & Reel (TR) is used to package it.It is included in the package 8-UFDFN Exposed Pad.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver is equipped with 2 outputs that can be used.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.I believe it belongs to the SIP32413 family.A total of 8 terminations have been recorded.For operation, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 2.4A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 8 pins.The LED driver has 76mOhm resistance.When this case is used, the output current is set to 2A.In this case, the analog IC in this gadget is DUAL SWITCHING CONTROLLER.
SIP32413DNP-T1-GE4 Features
Resistance of 76mOhm
SIP32413DNP-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32413DNP-T1-GE4 Power Switches ICs applications.
- Portable Video Game Players
- Low Voltage I/O System Power
- Smartphone and PDA
- PC Cards
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- HDD and SSD
- Wireless/Networking Cards
- Set-top-box
- Storage Drives