SIP32401ADNP-T1GE4
| Parameters | |
|---|---|
| Output Current | 2.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3.8 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 3800000ns |
| Rds On (Typ) | 62m Ω |
| Height | 600μm |
| Length | 1.25mm |
| Width | 1.65mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 72mOhm |
| Power Rating | 324mW |
| Max Power Dissipation | 324mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | SIP3240*A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Current | 2.4A |
| Output Configuration | High Side |
| Power Dissipation | 324mW |
SIP32401ADNP-T1GE4 Overview
It is package in Digi-Reel? case.This file is included in package 4-UFDFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.Slew Rate Controlled features are available on the lighting driver.There is a SIP3240*A family of things that it belongs to.A total of 4 terminations have been found in it.The 4 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.It is mounted in the way of Surface Mount.In this LED driving board, there is 72mOhm resistance.When this is the case, the output current is set to 2.4A.In this lighting driver, AUDIO/VIDEO SWITCH is the analog IC.To choose from, there are 1 channels.
SIP32401ADNP-T1GE4 Features
Resistance of 72mOhm
1 channels
SIP32401ADNP-T1GE4 Applications
There are a lot of Vishay Siliconix SIP32401ADNP-T1GE4 Power Switches ICs applications.
- HDD and SSD
- USB Ports/Hubs
- USB Power Distribution
- Telecom and Network Systems
- Hot Swap
- Solid-State Drives
- Wireless/Networking Cards
- Hard Disk Drives
- Handheld Devices
- Smartphone and PDA