SI3402-A-GM
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Base Part Number | SI3402 |
| Pin Count | 20 |
| Output Voltage | 5V |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.68A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Max Output Power | 17W |
| Switching Frequency-Max | 350kHz |
| Internal Switch(s) | Yes |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Package / Case | 20-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 61.603514mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 15W |
| Voltage - Supply | 2.8V~57V |
| Terminal Position | QUAD |
SI3402-A-GM Overview
There is an embedded version of it in the Tray package.It is packaged in the way of 20-VQFN Exposed Pad.I would like to inform you that this PoE controller is of the Controller (PD) type.Currently, there are a number of channels that are strong or weak: 1.Keeping its operating temperature at -40°C~85°C ensures PoE reliability.In order to operate this electrical Po E controller, it requires a voltage of 2.8V~57V as a supply voltage.An associated part can be established based on the base part number SI3402.In a 20 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.In addition, it is equipped with a 20 pin count.The Po E controller in question is Po E controller of Power Management Circuits.There is a 20 pin design on this board.As a requirement for 2mA to function properly, it must be supplied with a current.This electrical PoE power over ethernet controller has a maximal switching frequency of 350kHz, and that is its maximum switching frequency.Its maximum input voltage is 5.5V.This power over the ethernet controller has a maximum voltage output of 0.68A.A voltage of 5V is the output voltage of this power over ethernet controller.This power over ethernet devices requires a minimum input voltage of 4.5V.It is estimated that the maximum output power of this electrical PoE controller is 17W.
SI3402-A-GM Features
Tray package
20 pin count
20 pins
SI3402-A-GM Applications
There are a lot of Silicon Labs SI3402-A-GM Power Over Ethernet (PoE) Controllers applications.
- Public Information Displays
- Routers
- Industrial Automation Equipment
- Switches
- IEEE 802.3bt (Draft) Compliant Devices
- Single-Port PSE End-Point Applications
- Security Cameras
- Dual Signature PD/Forced UPOE
- Pico-base Stations
- 4PPOE