SI3401-E1-GM
| Parameters | |
|---|---|
| Package / Case | 20-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 61.603514mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | Controller (PD), DC/DC |
| Max Power Dissipation | 15W |
| Voltage - Supply | 2.8V~57V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 350kHz |
| Base Part Number | SI3401 |
| Pin Count | 20 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1.2W |
| Output Current | 2A |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SI3401-E1-GM Overview
The package Tube includes it.It is packaged in the way of 20-VQFN Exposed Pad.An PoE controller of this type is Controller (PD), DC/DC.Channels are growing strong/weak depending on the category: 1.Reliability is ensured by operating PoE at -40°C~85°C.This electrical Po E controller receives its supply voltage from 2.8V~57V.There is a possibility of determining its Po E controllers by referring to the base part number SI3401.In a 20 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.In addition, it comes with a 20 pin count.A 20-pin design is used in it.There should be a greater voltage at the supply than at 5V.For 2mA to be able to fully perform its function, a supply current needs to be provided.There is a frequency 350kHz associated with this electrical PoE ethernet controller.As a result of the output current of 2A, it offers maximum design flexibility.An power over ethernet PoE controller of this type has a maximum input voltage of 57V.This power over the ethernet controller's minimal input voltage is 2.8V.
SI3401-E1-GM Features
Tube package
20 pin count
20 pins
The output current of 2A
SI3401-E1-GM Applications
There are a lot of Silicon Labs SI3401-E1-GM Power Over Ethernet (PoE) Controllers applications.
- Pass-through System
- VoIP Phones
- IEEE 802.3af Compliant PoE Powered Devices
- Higher Power Ethernet Powered Devices
- Wireless Access Points
- Power over Ethernet
- Routers
- 4PPOE
- Security Cameras
- Non-Compliant, Application Specific Devices