SI1869DH-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 303MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | SI1869 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 1.8V |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Output Current | 1.2A |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 20V |
| Nominal Input Voltage | 20V |
| Continuous Drain Current (ID) | 1.2A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 1.8V |
| Input Characteristics | STANDARD |
| Voltage - Load | 1.8V~20V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 132m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 165mOhm |
| Built-in Protections | TRANSIENT |
| Height | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI1869DH-T1-GE3 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 6-TSSOP, SC-88, SOT-363 package.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -55°C~150°C TJ.In this LED driver, there are no outputs available.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Slew Rate Controlled.This object belongs to the SI1869 family.A total of 6 terminations have been recorded.The operation is performed through the 6 pins.It is important to note that the LED driving board has 1 functions.Using a voltage of 2.5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 6 pins.Currently, the LED driving board has a resistance of 303MOhm ohms.This case results in a 1.2A output current.A total of 2 channels are available for you to choose from.The greatest supply voltage it can handle is 20VV.Alternatively, 1.8V volts can be used if needed.
SI1869DH-T1-GE3 Features
Supplied from 2.5V
Resistance of 303MOhm
2 channels
SI1869DH-T1-GE3 Applications
There are a lot of Vishay Siliconix SI1869DH-T1-GE3 Power Switches ICs applications.
- Set-Top Boxes
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Storage Drives
- Portable GPS Device
- Solid State Drivers
- Gaming
- USB Protection
- Hot Swap
- Various applications equipped with buttons