SC26C92C1A,518
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | TIN (SN) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
SC26C92C1A,518 Overview
This product is available in a cost-effective package called 44-LCC (J-Lead).The transmission is conducted over 2, DUART channels.Tape & Reel (TR) is used in terms of packaging.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.In order to configure this device, 44 terminations are used.During operation, it receives a voltage of 5V.The status of this electronic part is currently Active.There are 2 serial I/Os working as a way for data communication.A method of mounting it is through Surface Mount.There is a voltage supply of 0 volts for the device.Electronic devices such as this are known as 44-pin integrated circuits.This IC operates at a clock frequency of 8MHz.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.Maximum operating temperature is 70°C.Its base part number is SC26C92.Universal asynchronous receiver-transmitter is possible to transfer data using 15 I/Os.Universal asynchronous receiver-transmitter is acceptable for the supply current to reach 25mA at the highest point.
SC26C92C1A,518 Features
2 serial I/Os
Clock frequency of 8MHz
15 I/Os
SC26C92C1A,518 Applications
There are a lot of NXP USA Inc. SC26C92C1A,518 UARTs applications.
- Factory Automation
- Point-of-Sale Systems
- Multi-port RS-232/RS-422/RS-485 Cards
- Communications equipment
- Ethernet Network Routers
- Industrial computing
- Remote Access Servers
- GPS Systems
- Portable Applications
- DTE for Modem Communication Systems