SC16C752IB48,128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5 V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C752 |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
SC16C752IB48,128 Overview
In addition, it is available in the cost-effective package 48-LQFP.Transmission is done through 2, DUART channels.For packaging purposes, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.In order to configure this device, 48 terminations are used.UART operates on 3.3V supply voltage.At present, this electronic part has a status of Obsolete.As a means of transferring data, there are 2 serial I/Os.Mounting it through Surface Mount is possible.This device operates with a supply voltage of 2.5V 3.3V 5V.This electronic device belongs to the 48-pin IC family.A frequency of 80MHz is measured for this IC.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.85°C is the maximum temperature that it can operate at.Providing power supplies of 3.3/5V makes it reliable and efficient for electronic designers.Moreover, it is also able to perform ALSO OPERATES AT 2.5 V SUPPLY.SC16C752 is set as the base part number for the part.A minimum temperature of -40°C is required to operate it.
SC16C752IB48,128 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 2.5 V SUPPLY
SC16C752IB48,128 Applications
There are a lot of NXP USA Inc. SC16C752IB48,128 UARTs applications.
- Personal Digital Assistants
- Wireless Portable Point-of-Sale Terminals
- Handheld Terminals and Tablets
- White goods
- Industrial computing
- Factory Automation and Process Controls
- Handheld Computers
- GPS Devices
- Cellular Phones DataPort
- Universal PCI Bus Add-in Card