PS391CSE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | IT CAN ALSO OPERATE FROM A SINGLE 3V TO 15V SUPPLY |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PS391 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 130ns, 75ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 75ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | RoHS Compliant |
PS391CSE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. On the other hand, analog switches can be constructed using SPST - NC switching circuits. The multiplexer consists of 4 circuits. Use PS391 to search for variants of the digital switches. There is also IT CAN ALSO OPERATE FROM A SINGLE 3V TO 15V SUPPLY to look out for in this electronic part.
PS391CSE Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 100MHz
Additional Features: IT CAN ALSO OPERATE FROM A SINGLE 3V TO 15V SUPPLY
PS391CSE Applications
There are a lot of Diodes Incorporated PS391CSE Analog Switches & Multiplexers ICs applications.
- CSU
- Ultrasound
- Fault Tolerant Systems
- SDH/SONET multiplexers
- PBX interfaces
- Intelligent PBX
- Avionics test equipment
- Central office
- Residential Gateways, Home Gateway/Router
- Microprocessor controlled systems