PIC24FJ128DA210-I/BG
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 121-TFBGA |
| Number of Pins | 121 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2018 |
| Series | PIC® 24F |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 121 |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Base Part Number | PIC24FJ128DA210 |
| Pin Count | 121 |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| Nominal Supply Current | 12mA |
| RAM Size | 96K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 24x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| CPU Family | PIC |
| Number of Programmable I/O | 44 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 650μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ128DA210-I/BG Overview
There is a 121-TFBGA package available to save space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. The device has a PIC core processor. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. 84 I/Os have been provided by the device. Based on the PIC24FJ128DA210 base part number, it can be compared with other components. At BOTTOM, its terminals are located. A 121 termination is contained within it. There are a number of electrical components in the PIC? 24F series, including this one. By using a 3.3V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. For its construction, 121 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. It has a total of 121 pins on it. Subcategory Microcontrollers includes this component. A device with a memory size of 128kB can store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. A total of 5 timers/counters are present. This part is part of the PIC family of CPUs. A chip with 44 programmable inputs/outputs is available. For normal operation, the supply voltage (Vsup) should be kept above 2.2V. Using oscillator type Internal makes it work.
PIC24FJ128DA210-I/BG Features
121-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128DA210-I/BG Applications
There are a lot of Microchip Technology PIC24FJ128DA210-I/BG Microcontroller applications.
- Television
- Calculator
- Information appliances (networking of household appliances)
- Projector
- Instrument control
- Kindle
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Microwave ovens
- Dishwashers
- Fax machines