PIC18LF26K80-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 64MHz |
| Base Part Number | PIC18LF26K80 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 3.6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | ECANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| EEPROM Size | 1K x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 5 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC18LF26K80-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. In the package Tube, it is included. A PIC core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 24 I/Os on it. To find equivalent components, use its PIC18LF26K80 base part number. DUAL is the position of its terminals on the board. A 28 termination is contained within it. This electrical component is part of the PIC? XLP? 18K series. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed using 28 pins. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. A device with a memory size of 64kB can store programs and data. The system is highly efficient when working at a frequency of 64MHz. It is part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 3V. There is an oscillator type Internal used in this circuit.
PIC18LF26K80-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF26K80-I/SP Applications
There are a lot of Microchip Technology PIC18LF26K80-I/SP Microcontroller applications.
- Temperature sensing and controlling devices
- Playstation
- Auto-breaking system
- Embedded gateways
- Information appliances (networking of household appliances)
- Printers
- Calculator
- Digital cameras
- Hearing aids
- Digital set-top boxes