PIC18LF26J53-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 18J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF26J53 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~2.75V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 15.1mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 3 |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC18LF26J53-I/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. The way of mounting it is Surface Mount. It comes in the package?of a Tube. Devices with PIC core processors are available. When working, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. 22 I/Os have been provided by the device. A comparable component can be found by using the base part number PIC18LF26J53. DUAL is the position of its terminals on the board. A 28 termination is contained within it. There are a number of electrical components in the PIC? XLP? 18J series, including this one. Because the supply voltage is 2.5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 28 pins are used in its construction. There are 28 pins on it. This is a component included in Microcontrollers. The devices have a memory size of 64kB that can be used to store programs and data. It is important to note that the maximum supply current is 15.1mA. Working at a frequency of 48MHz results in excellent efficiency. 8 timers/counters are in use. It belongs to the PIC CPU family. There are a total of 3 programmable I/Os available. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. The oscillator type Internal is used to operate the device.
PIC18LF26J53-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF26J53-I/SO Applications
There are a lot of Microchip Technology PIC18LF26J53-I/SO Microcontroller applications.
- Process control devices
- Mobile computers
- Answering machines
- Projector
- Smart instruments
- Missile control
- Automatic staplers
- Instrument control
- Medical instruments chromatographs
- Light sensing & controlling devices